STRAP: FORK END, MIL-SPEC NAS 1435-K
STAINLESS STEEL |
| CABLE DIA |
MS DASH |
A |
B |
C |
D |
E |
F |
| 1/16" |
2 |
1.063 |
0.454 |
0.188 |
0.042 |
0.375 |
0.093 |
| 3/32" |
3 |
1.500 |
0.616 |
0.188 |
0.049 |
0.437 |
0.108 |
| 1/8" |
4 |
1.625 |
0.638 |
0.188 |
0.093 |
0.500 |
0.195 |
| 5/32" |
5 |
1.937 |
0.699 |
0.250 |
0.096 |
0.562 |
0.202 |
| 3/16" |
6 |
2.187 |
0.750 |
0.313 |
0.125 |
0.687 |
0.260 |
|
These stamped terminals are often used with a ball and shank or hex plug. They allow for cable rotation as well as equal loading on metal parts. Common applications include critical commercial applications such as high-reliability flight controls and similar uses.
|
STRAP: EYE END, MIL-SPEC NAS 1435-E
STAINLESS STEEL |
| CABLE DIA |
MS DASH |
A |
B |
C |
D |
E |
| 1/16" |
2 |
1.063 |
0.454 |
0.188 |
0.088 |
0.375 |
| 3/32" |
3 |
1.500 |
0.616 |
0.188 |
0.103 |
0.437 |
| 1/8" |
4 |
1.625 |
0.638 |
0.188 |
0.190 |
0.500 |
| 5/32" |
5 |
1.937 |
0.699 |
0.250 |
0.197 |
0.562 |
| 3/16" |
6 |
2.187 |
0.750 |
0.313 |
0.255 |
0.687 |
|
|
NOTE: Most standard fittings are designed to hold the minimum breaking strength of a particular cable diameter. The holding strength of any fitting applied to bare cable should never be specified at its maximum capability. Specifications should be based on the working load and the appropriate safety factor for the application. The specification should never exceed the minimum holding strength capability of the cable.
|
